User Tools

Site Tools


build:hardware

This is an old revision of the document!


Hardware Info

This is a description of the hardware being used for our new Linux servers.

Hardware

We bought 2 Compaq ProLiant 6400R systems for $650 from a member who posted them on our mailing list. Both systems are maxed out with RAM and CPU, and he threw in some spare CPUs and PSUs. We thought it was a pretty good deal for the price. It did take some work to get them up and running though; we had some difficulty getting the hardware working.

Firmware Configuration

To configure the RAID array and the hardware, we had to download, burn, and boot the HP SmartStart CD. SmartStart version 5.50 is required for these systems. SmartStart 7.x does NOT support these systems.

We first configured the drive array, to place all 4 hard drives in the RAID 5 set. Then we created the system partition, to hold the Compaq System Configuration Utilities. We then installed the System Configuration to the partition, and the ran the System Configuration Utilities.

On B system, physical drives show as negotiating as NARROW SCSI. carl has configured the array A as Raid 5 + standby spare but on boot it has all 4 drives red and reports drives not communicating, possible SCSI error.

On SysA, system clock is GMT. Debiam mirror from cerias at purdue.

Old New Hardware

The plan was to use a Compaq ProLiant 5000R as bud, and another ProLiant as budlight. However, we weren't able to get Debian installer to recognize the Compaq SMART-2/P Array Controller (even though it has been supported by Linux for a long time now) and the second ProLiant never materialized.

In order to install and configure a system to get started with, Craig donated another rackmount system for us to use as a loaner, until we got some new permanent systems.

Specs

Bud and Budlight
Manufacturer: Compaq (now HP)
Model: ProLiant 6400R
CPU: 4 x 550 MHz Pentium III
RAM: 4 GB
HD: 4 x 18 GB, in RAID 5, for 54 GB total
NICs:
Case: 4U rackmount (deep, probably 26")
PSU: Redundant hot-swappable power supplies
Loaner from Craig
Manufacturer: F5 (mainly known for their BigIP load balancers)
Model: 3-DNS (DNS appliance)
CPU: 850 MHz Pentium III, socket for a 2nd CPU
RAM: 512 MB
HD: 30 GB IDE
NICs: 2 Intel 100 Mbps (one on-board, one PCI)
Case: 2U rackmount
build/hardware.1122750469.txt.gz · Last modified: 2005/08/08 23:10 (external edit)